Tenax TENAX Corporation
 
  International web site USA Website Home Page Geosynthetics Soil stabilization PAVED AND UNPAVED ROADS STABILIZATION  
stabilization of paved and unpaved roads estabilizaciĆ³n de caminos pavimentados
About Tenax Literature Contact Us Links Site Map
 
     

Paved and unpaved roads stabilization

 

 

Installation of TENAX geogrids
Installation of TENAX LBO geogrids prior
to spreading and compaction of fill material

geogrids for stabilization of the foundation soil
Compaction of fill material over TENAX LBO
geogrids for stabilization of the foundation soil

Base reinforcement of the road embankment
Base reinforcement of the road embankment
of the Rome-Fiumicino Airport High Way

stabilization of the foundation soil
Altshausen (Germany)

Subsoil stabilization with nonwovens and geogrid
Altshausen (Germany)
Subsoil stabilization with nonwovens and
integral geogrid TENAX

 

 

Whenever a paved or unpaved road needs to be built on soft or saturated soil, settlement may take place during or after construction, with serious consequences for the life span of the road.

The base layer, made-up from granular material, can sink into the foundation soil, and horizontal and vertical movement capable of forming ruts can occur at the base.

To avoid these phenomena, it’s necessary to place one or more layers of reinforcing geogrids having the ability to confine the aggregate and distribute the load.

Geosynthetics allow for the reduction in the thickness of the base layer and they increase the service life of the structure whilst utilizing lower grade fill material.

The use of a TENAX LBO geogrid minimizes the horizontal deformation of the aggregate base layer, limiting its deterioration and conserving its thickness.

 

TENAX LBO geogrids are a mesh structure having apertures in which granular material is confined by interlocking.

 


Laboratory and on-site testing have demonstrated the effectiveness of TENAX geogrids for the minimization of settlement rutting and for the reduction of the thickness required for the road base.


laboratory testing

5.000.000 Passages

laboratory testing

Road base thickness: 30 mm
Subgrade CBR: 1.0



The reduced likelihood of deformation in the base layer limits the formation of “fractures” in elements beneath the base itself.
In fine-grained sand or clay like soils, it’s advisable to use a finer mesh multi-layer geogrid such as the TENAX MS series.

When the grain size characteristics of the aggregate base soil are not suitable to act as a filter of the subgrade, it’s necessary to prevent the possibility that the former, as a consequence of the compression and relaxation cycles to which it is subjected, can migrate into the upper layer.

Under these circumstances, the use of a TENAX GT geocomposite, made from a reinforcing TENAX LBO geogrid laminated to a light nonwoven geotextile and functioning as a separating membrane, has proved effective.

The interlocking between the geogrid and the soil particles is not prevented thanks to the geotextile’s high local deformability in the openings between the geogrid meshes.

If the road is to be constructed in an area with a high water table, placing a filtering/draining TENAX TNT geocomposite at the base of the structure provides an excellent means for draining the structure itself, preventing backfill from sinking and contributing to the distribution of load.

 

 

 

 

PRODUCTS

 

TENAX LBO geogrid

TENAX MS geogrids

TENAX GT geocomposite

 

 

 

The base of a road on soft subgrade

TENAX geosynthetics provide the drainage, separation and reinforcement to stabilize the road base

TENAX geosynthetics provide the drainage, separation and reinforcement required to stabilize the base of roads

TENAX geogrids

 

The base of a road on soft subgrade will quickly deform, with rutting at the surface and difficulty of movements for the vehicles.

Closely spaced layers of TENAX geogrids considerably stiffen the road base, while TENAX geocomposites maintain the separation between the fill and the subgrade while providing positive drainage.

TENAX geosynthetics provide the drainage, separation and reinforcement required to stabilize the base of roads on soft subgrade.

 

LEGEND:
1. Soft soil

2. Granular fill

3. Soil cracking

4. Deformed profile

5. Asphalt or concrete pavement

6. TENAX bi-oriented geogrids

7. TENAX TENDRAIN, TENAX TN, TENAX GT geocomposites

 

The base of a road on soft subgrade

 

Tenax geogrids for roads stabilization

 

The use of TENAX bi-oriented geogrids allows to:

1) Reduce the progressive failure of the flexible paved roads: The road service life can be increased up to a factor of 10 without changing the properties of the road components.

2) Reduce the thickness of the aggregate base layer without loosing in performances and structural capacity.

 

 

TENAX Corporation
4800 East Monument Street, Baltimore, Maryland 21205, USA

Phone: 410-522-7000 • Toll free phone: 800-356-8495
Fax: 410-522-7015 • Toll free fax: 877-836-2987

Manufacturer since 1987